OBIC Prime 1505PW
Rapid Curing Potable Water Primer
Typical Installation
Potable water primer
Product Highlights
OBIC Prime 1505PW is a two component, high solids, fast curing, modified urethane polymer. Product highlights include:
- Excellent adhesion to properly prepared concrete
- Low viscosity that quickly penetrates concrete substrates for permanent bonding
- Self-leveling for an aesthetic smooth finish
- Cures at temperatures down to 0ºF
- Very good chemical resistance
- Fully ANSI/NSF 61 approved paired with OBIC Prime 1505PW concrete primer
- Produced in an ISO 9001-2015 certified facility
Properties of Components
| Property | Value |
|---|---|
| Pot life @ 72°F | 3 minutes |
| Tack free time @ 72°F | 10 minutes |
| Final cure @ 72°F | 20 minutes |
| Solids content, by weight | 58% |
| VOC | 3.7 lbs./gal |
| Recommended thickness | 3-6 mils dft. |
Physical Properties
| Property | Value |
|---|---|
| Hardness, Shore D, D-2240 | 71 D |
| Tensile strength, D-638 | 4500 psi |
| Ultimate elongation, D-638 | 6% |
| Compressive strength (sand), D-695 | 3800 psi |
| Compressive strength (neat), D-695 | 4450 psi |
| Bond strength, D-4541 | > 400 psi |
| Shrinkage | None |
| Exudation | None |
Safety
Read and review entire SDS for OBIC Prime 1505PW prior to use.
Packaging, Storage & Shelf Life
OBIC Prime 1505PW is available in 5-gallon pails. It should be stored in sealed containers between 60ºF and 90ºF. Shelf life is 12 months under normal conditions, in factory sealed containers.